All guides
- Guide
Can You Drill Through Cast Iron? Bits, Speed and Steps
Yes, cast iron can be drilled with cobalt or TiN-coated HSS bits. Which bit, what speed, why gray iron is drilled dry, and the step-by-step method.
- Guide
How to Get a Stuck Drill Bit Out of a Drill Chuck
How to remove a drill bit stuck in the chuck, whole or snapped off: loosening a jammed keyless or keyed chuck, and how to stop it happening again.
- Guide
Masonry Drill Bits: How to Drill Concrete and Brick
Which masonry drill bit to use for concrete, brick and block: carbide-tipped vs SDS-plus vs SDS-max, the right bit size for anchors, and how to drill cleanly.
- Best picks
4 Best Countersink Drill Bit Sets for Wood
Countersink bit sets for wood screws: tapered, fluted and combined pilot-and-countersink bits, the 82° angle, and four sets compared.
- Guide
Do All Drill Bits Fit All Drills? Shanks and Chucks
Which drill bits fit which drills: round and hex shanks in keyed and keyless chucks, 1/4-inch hex impact drivers, and SDS-plus and SDS-max hammers.
- Guide
How to Drill a Hole in a Granite Countertop
How to drill granite countertops for faucets and fittings: diamond core bits, wet versus dry drilling, slow speed, and how to avoid chips and cracks.
- Best picks
7 Best Cobalt Drill Bits for Hardened Steel
Cobalt drill bits (M35 and M42) for hardened and stainless steel: how they differ from titanium-coated bits, drilling speed, and seven sets compared.
- Guide
Left-Hand vs Right-Hand Drill Bits: Differences and Uses
What left-hand drill bits are, how they differ from right-hand bits, and how to use one in reverse to remove a broken bolt or screw, step by step.
- Best picks
Best Drill Bits for Metal: Types, Picks and Buying Guide
Drill bits for steel and other metals: HSS, titanium-coated, cobalt M35 and M42, step bits and split points, with ten bits and sets compared.
- Guide
What Size Is a Number 7 Drill Bit? Inches and mm
A number 7 drill bit is 0.201 inch (5.105 mm), between 13/64 and #8. How number sizes work, the nearest fractional and metric bits, and what a #7 is for.
- Guide
How to Drill Holes in Plexiglass Without Cracking It
How to drill plexiglass (acrylic) without cracking or melting it: the right bit, low speed, a backing board, tape and cooling, step by step.
- Best picks
9 Best Diamond Drill Bits for Porcelain Tile
Diamond drill bits for porcelain tile compared: core bit vs diamond-tipped, sizes for pipes and fixtures, and how to drill porcelain without cracking it.
- Guide
1/4-20 Tap Drill Bit Size: What Size to Use and Why
The tap drill for a 1/4-20 thread is a #7 bit (0.201 in). Clearance hole sizes, the 13/64 and 5.1 mm alternatives, and how to drill and tap the hole.
- Guide
Drill Bit Size for a #10 Screw: Pilot and Clearance Holes
Drill bit sizes for #10 screws: 1/8" pilot in softwood, 9/64" in hardwood, 3/16" clearance, plus tap drills for 10-24 and 10-32 threads.
- Guide
Drill Bit Sets: Which Set for Wood, Metal and Masonry
How to choose a drill bit set: HSS, cobalt, titanium-coated, brad point and masonry sets compared, which sizes a set should include, and what to avoid.
- Guide
Drill Bit Size Chart: Fractional, Number, Letter and Metric
Drill bit size chart with fractional, number, letter and metric drills in decimal inches and mm, plus how to measure a bit. Tap drill sizes have their own chart.
- Best picks
Best Drill Bits for Stainless Steel: Cobalt and Step Bits
Drill bits for stainless steel: M35 and M42 cobalt, step bits, the speed and oil to use, and eight bits and sets compared.
- Guide
Tap Drill Size Chart: UNC, UNF, Metric and NPT
Tap drill sizes for UNC, UNF, metric and NPT threads in one chart, with decimal inches and millimetres, and how to pick the right drill for each tap.
- Guide
Can You Drill Tempered Glass? Why It Shatters
No, tempered glass can't be drilled: it shatters as soon as the surface is cut through. How to tell if glass is tempered, and how to drill ordinary glass.
- Guide
Can You Drill Into Wood Filler? When and How
Yes, you can drill into most wood fillers once fully cured. Which fillers hold screws, how long to wait, and how to drill without cracking the patch.
- Guide
1/2 in vs 3/8 in Drill: Which Chuck Size Do You Need?
1/2-inch vs 3/8-inch drill: what the chuck size means, the largest bit each takes, torque and weight, and which suits DIY or heavy-duty work.
- Guide
Drill Guides and Drill Press Stands for a Hand Drill
How a drill guide or drill press stand helps a hand drill make straight, square and angled holes, which type to choose, and when you need a real drill press.
- Guide
Can a Hammer Drill Be Used as a Regular Drill?
Yes, a hammer drill works as a regular drill with the hammer action switched off. When it's a good substitute, when it isn't, and how to set it.
- Guide
Can You Use a Hammer Drill to Mix Concrete?
You can mix small batches of concrete or mortar with a hammer drill in drill-only mode and a paddle. Speed, paddle size, and when to use a mixer.
- Guide
How to Reduce Drilling Noise at Home
How to make drilling quieter: the right drill and bit, sharp bits and lower speed, damping vibration, timing, and hearing protection.
- Best picks
Best Cordless Drills for Polishing, With Buffing Pads
Cordless drills and buffing pad kits for polishing cars and furniture: speed control, chuck size and pad choice, with four drills and two pad sets.
- Guide
Can a Drill Press Be Used as a Mill?
A drill press can do only very light milling, because its chuck and bearings aren't made for side loads. The risks, what works, and when to buy a mill.
- Guide
Self-Drilling vs Self-Tapping Screws: Which Do You Need?
Self-drilling screws drill their own hole and cut threads in one step; self-tapping screws need a pilot hole. Which to use for metal, wood and roofing.
- Guide
What Do the Numbers on a Drill Mean? Clutch and Speed
What the numbers on a drill mean: the clutch (torque) ring, the 1 and 2 speed switch, the drill and hammer symbols, and which setting to use.
- Guide
Types of Hammers: Framing, Dead Blow, Ball Peen and Mallet
Types of hammers and their uses: claw, framing, finishing, ball peen, dead blow, mallet, sledge and drywall hammers, with weights and which to buy first.