Drills
A drill turns a bit to make holes and drives screws. Choosing one comes down to the jobs you do: a drill/driver covers most home work, a hammer drill adds a hammering action for masonry, and a drill press gives straight, repeatable holes on the bench.
- What do the numbers on a drill mean? explains the clutch and speed settings.
- 1/2 in vs 3/8 in drill helps you pick a chuck size.
- Cordless drill voltage: 12V vs 18V vs 20V explains what the battery voltage changes.
- Drill attachments: sanders, socket adapters and wire brushes.
- Can a hammer drill be used as a regular drill? and can you mix concrete with one?
- Can a drill press be used as a mill?
- Best cordless drill for polishing
- How to reduce drilling noise
- Self-drilling vs self-tapping screws
- Drill guides and drill press stands for a hand drill
Drills guides
- Guide
1/2 in vs 3/8 in Drill: Which Chuck Size Do You Need?
1/2-inch vs 3/8-inch drill: what the chuck size means, the largest bit each takes, torque and weight, and which suits DIY or heavy-duty work.
- Guide
Drill Guides and Drill Press Stands for a Hand Drill
How a drill guide or drill press stand helps a hand drill make straight, square and angled holes, which type to choose, and when you need a real drill press.
- Guide
Can a Hammer Drill Be Used as a Regular Drill?
Yes, a hammer drill works as a regular drill with the hammer action switched off. When it's a good substitute, when it isn't, and how to set it.
- Guide
Can You Use a Hammer Drill to Mix Concrete?
You can mix small batches of concrete or mortar with a hammer drill in drill-only mode and a paddle. Speed, paddle size, and when to use a mixer.
- Guide
How to Reduce Drilling Noise at Home
How to make drilling quieter: the right drill and bit, sharp bits and lower speed, damping vibration, timing, and hearing protection.
- Best picks
Best Cordless Drills for Polishing, With Buffing Pads
Cordless drills and buffing pad kits for polishing cars and furniture: speed control, chuck size and pad choice, with four drills and two pad sets.
- Guide
Can a Drill Press Be Used as a Mill?
A drill press can do only very light milling, because its chuck and bearings aren't made for side loads. The risks, what works, and when to buy a mill.
- Guide
Self-Drilling vs Self-Tapping Screws: Which Do You Need?
Self-drilling screws drill their own hole and cut threads in one step; self-tapping screws need a pilot hole. Which to use for metal, wood and roofing.
- Guide
What Do the Numbers on a Drill Mean? Clutch and Speed
What the numbers on a drill mean: the clutch (torque) ring, the 1 and 2 speed switch, the drill and hammer symbols, and which setting to use.
- Guide
Drill Attachments: Sander, Socket Adapter and Wire Brush
Drill attachments explained: sanding pads and drums, socket adapters, wire brushes, polishing pads and mixers, with speed and safety limits.
- Guide
Cordless Drill Voltage: 12V vs 18V vs 20V Explained
What cordless drill voltage means: 12V vs 18V vs 20V Max, why 18V and 20V are the same class, what amp-hours change, and which size of drill suits which jobs.
Related tools
Frequently asked questions
What size drill do I need for home use?
An 18V or 20V cordless drill/driver with a 1/2 inch chuck handles most home jobs: drilling wood and metal, and driving screws. Add a hammer drill only if you drill brick or concrete often.
What is the difference between a drill and a hammer drill?
A hammer drill adds a fast forward hammering action to the rotation, which breaks up masonry as the bit turns. With the hammer setting off, it works as a normal drill.