All guides
- Guide
Can I Use a Torque Wrench as a Breaker Bar?
Why you shouldn't use a torque wrench as a breaker bar to loosen tight bolts, what it does to its calibration, and what to use instead.
- Guide
Types of Torque Wrenches: Click, Digital and Beam
Torque wrench types compared: click, beam, dial, digital and split-beam, which drive size (1/4, 3/8 or 1/2 in) suits which job, accuracy and use.
- Guide
Can You Use 21 Degree Nails in a 22 Degree Nailer?
Whether 21-degree nails work in a 22-degree framing nailer: why many nailers accept a range of angles, when it jams, and what to check first.
- Guide
What Is a Palm Nailer and When to Use One?
What a palm nailer is, how it works, the jobs it suits (joist hangers, tight spaces, short and full-size nails), air vs cordless, and how to use one safely.
- Guide
Brad Nailer vs Finish Nailer vs Pin Nailer
Brad, finish and pin nailers compared: nail gauge, nail length, holding power and the jobs each one suits, plus where framing nailers and staplers fit in.
- Guide
Can You Use Used Motor Oil for Chainsaw Bar Oil?
Why used motor oil makes poor chainsaw bar oil: it lacks tackifier, carries metal and soot, and can void the warranty. Better alternatives listed.
- Guide
16 vs 18 Inch Chainsaw: Which Bar Length Do You Need?
16 vs 18 inch chainsaw bars compared: wood size each cuts, engine size, weight, control and safety, and the simple rule for choosing a bar length.
- Best picks
Best Aftermarket Chainsaw Carburetors and How to Choose
Aftermarket chainsaw carburetors compared: which fit Stihl, Husqvarna and Poulan saws, what the kits include, and how to choose and fit one.
- Guide
How to Measure a Chainsaw Bar and Chain
How to measure a chainsaw bar (called length vs true length) and find the chain's pitch, gauge and drive link count, so a replacement bar or chain fits.
- Guide
Can I Cut Aluminum With a Chop Saw?
Yes, a chop saw cuts aluminum with a carbide blade made for non-ferrous metal. Which blade, how to set up the cut, and the safety steps.
- Guide
Can a Wood Bandsaw Cut Metal? Speed and Blades
A wood bandsaw runs too fast for most metal. Blade speeds compared, what a wood bandsaw can cut (aluminum, brass), and how to slow one down.
- Guide
Can You Cut Plexiglass With a Bandsaw?
Yes, a bandsaw cuts plexiglass with a fine-tooth blade and steady feed. Blade TPI, speed, how to stop melting and chipping, and safety tips.
- Guide
Are Circular Saw Blades Hardened?
Yes: circular saw blade plates are heat-treated, and carbide tips are far harder still. How blades are hardened and what it means for use and sharpening.
- Guide
Are Table Saw Blades Reverse Threaded?
The blade isn't threaded; the arbor nut is. Which table saws use a standard thread, which use a left-hand thread, and how to loosen the nut safely.
- Guide
Track Saw vs Circular Saw: Which Cuts Straighter?
Track saw vs circular saw compared: straightness, splinter-free edges, plunge cuts, sheet goods, cost, and when a circular saw with a straightedge is enough.
- Guide
Types of Hand Saws with Uses: A Complete Guide
Types of hand saws and their uses: rip, crosscut, hacksaw, coping, bow, keyhole, Japanese, backsaw and fret saws, with the right TPI for each job.
- Best picks
4 Best Jigsaw Blades for Metal Cutting
Jigsaw blades for cutting metal: bi-metal and HSS blades, the TPI for sheet, tube and thicker metal, and four blades compared.
- Guide
Can a Jigsaw Cut a 2x4? Blade Length and Tips
Yes, a jigsaw cuts a 2x4 (1-1/2 in thick) with a wood blade at least 3 in long. Blade choice, straight and bevel cuts, and keeping the cut square.
- Guide
Best Saw for Cutting Metal: Chop, Band, Jigsaw or Grinder
Which saw cuts metal best: abrasive chop saw, cold saw, band saw, jigsaw, reciprocating saw or angle grinder, compared by material, cut quality and blade.
- Guide
Can You Put a Smaller Blade on a Miter Saw?
A smaller blade can fit a miter saw if the arbor and RPM rating match, but makers advise against it. What changes, the risks, and better options.
- Best picks
Best 10 Inch Wet Saw Blades for Porcelain Tile
10-inch diamond wet saw blades for porcelain tile: continuous rim vs segmented, arbor size, rim thickness, and the blades compared.
- Guide
Radial Arm Saw vs Miter Saw: Which Do You Need?
Radial arm saw vs miter saw compared: how each cuts, crosscut capacity, dadoes, angles, safety and space, and why most shops now choose a sliding miter saw.
- Guide
Can You Cut Tile With a Circular Saw? Blade and Steps
Yes, a circular saw cuts tile with a diamond blade. Which blade, wet vs dry cutting, dust and safety, and when a wet saw or tile cutter is better.
- Guide
Can You Cut Tile with a Miter Saw? Safety and Tips
Yes, with a diamond blade a miter saw can make straight tile cuts. Blade choice, dust control, which tiles work, and when to use a wet saw instead.
- Guide
5G Welding Position: Technique, Equipment and Safety
The 5G welding position: a fixed horizontal pipe welded all the way round. Setup, uphill and downhill technique, equipment, and why it's tested.
- Guide
7018 Welding Rod: Uses, Amperage and Storage
What E7018 welding rod means, what it's used for, amperage by rod size, AC vs DC, and how to store and re-dry low-hydrogen rods so they don't crack welds.
- Guide
Welding Jackets: Leather vs FR Cotton vs Hybrid
How to choose a welding jacket: leather, flame-resistant cotton or hybrid, which suits MIG, TIG and stick welding, fit, length and what never to wear.
- Guide
What Is MIG Welding? A Beginner Guide to the Basics
What MIG welding (GMAW) is: how the wire and shielding gas work, the equipment, gases and transfer modes, and the metals it welds.
- Guide
What Is Welding? Processes, Types, Equipment and Safety
What welding is: how heat and filler join metal, the main processes (stick, MIG, TIG, flux-core, gas), joint types and power sources.
- Guide
Welding Safety Tips: How to Stay Safe While Welding
Welding safety tips: helmet shade and eye protection, gloves and flame-resistant clothing, ventilation for fumes, fire prevention and electrical safety.