Beginner Welding Setup: Which Welder and Which Kit

Most beginners start with a wire-feed welder: MIG for clean indoor work on thin to medium steel, or a gas-free flux-core setup for outdoors and rusty metal. Stick is the cheapest and suits thick steel and repairs, and TIG is the hardest to learn. Then add a welding helmet, gloves, jacket, chipping hammer, wire brush, clamps and a fire extinguisher.

Which process to start with

ProcessEasy to learnNeeds gasBest for beginners who
MIG (solid wire and gas)EasiestYesWeld indoors on clean steel, thin sheet
Flux core (self-shielded)EasyNoWeld outdoors, on rusty or thicker steel
StickModerateNoWant the cheapest machine for repairs and thick steel
TIGHardestYesWant precise, neat welds and have time to practice

See flux core vs MIG, what is MIG welding and stick welders for how each works.

120 V or 240 V?

A 120 V machine runs on an ordinary outlet and suits thin to medium steel, up to about 1/4 in with the right wire and multiple passes. A 240 V machine welds thicker steel and runs a higher duty cycle, but needs a suitable circuit. Check the machine’s input requirement and your circuit before you buy.

What a starter welding kit needs

  1. A welder that suits your process and power supply.
  2. A helmet with the right shade; see welding helmets and the lens shade chart.
  3. Gloves and a jacket; see welding gloves and welding jackets.
  4. A chipping hammer and wire brush for slag and cleaning.
  5. Clamps, magnets and pliers to hold work.
  6. An angle grinder for prep and cleaning.
  7. Practice steel, such as mild steel strips and offcuts.
  8. A fire extinguisher and a clear, non-flammable work area; see welding safety tips.

For a bench to weld on, see welding tables, and for a wider tool list, see welding tools for a home shop.

How to practice

  1. Practice laying beads on flat scrap before you join anything.
  2. Learn the machine’s settings chart, change one setting at a time and note the result.
  3. Check your welds for the defects in good vs bad welds.
  4. Move from flat welds to fillets and then joints on real projects.

Safety first

Weld away from flammable material, in a ventilated area, and wear a helmet, gloves and flame-resistant clothing every time.

Frequently asked questions

What is the best type of welder for a beginner?

A wire-feed MIG or flux-core machine, because the machine feeds the wire and you only control travel and gun angle. A flux-core capable welder avoids buying gas.

Should a beginner buy a 120 V or 240 V welder?

A 120 V welder runs on a normal outlet and suits thin to medium steel, up to about 1/4 in. A 240 V welder handles thicker steel but needs a suitable outlet.

Is stick welding harder than MIG?

Usually yes. Stick needs you to keep the arc length steady, replace the rod and chip slag. It is cheap and works outdoors, but MIG is easier to start with.

What do I need in a starter welding kit?

A welder, helmet, gloves, jacket, chipping hammer and wire brush, clamps or magnets, pliers, an angle grinder, practice steel and a fire extinguisher.

Report a mistake on this page