Welder Generators: What Size Generator to Run a Welder

To size a generator for a welder, multiply the welder’s input amps by the input volts, then choose a generator whose running watts are above that number. A 120 V welder drawing 20 A needs about 2,400 W running and more for surge. Smaller welders can run on an inverter generator, and engine-driven welders have the generator built in.

How to size a generator

  1. Find the welder’s rated input amps and volts on the data plate or in the manual.
  2. Multiply amps by volts to get watts. For example, 20 A at 120 V is 2,400 W.
  3. Choose a generator whose running (rated) watts are above that, with margin. Surge watts help only for a moment, so don’t rely on them.
  4. Add the load of anything else on the generator, such as lights or a grinder.
  5. Check the maker’s notes, since some welders list a recommended generator size.
Welder exampleInputApprox. running watts
Small 120 V MIG or stick on a 20 A circuitAbout 15 to 20 A at 120 VAbout 1,800 to 2,400 W
240 V machine at 30 A input30 A at 240 VAbout 7,200 W

These are examples of the arithmetic. Always use the numbers on your own welder.

Generator types

TypeGood forNotes
Inverter generatorSmall welders, clean powerQuiet, but costs more per watt
Conventional portable generatorLarger weldersLouder, more output for the price
Engine-driven welderRemote and field workHas the welder and generator in one

Running a welder on a generator

  • Keep the welder’s output amps lower than its maximum when you can, which lowers the input load.
  • Check the generator has a suitable outlet, and use a heavy-duty cord that is as short as possible.
  • If the generator bogs down or trips, reduce the welder’s setting.

For choosing a machine, see stick welders and beginner welding setup, and for the power input of a wire-feed machine see what is MIG welding.

Safety

Run generators outdoors, away from doors and windows, because the exhaust contains carbon monoxide. Let the engine cool before refueling, and ground the generator as the manual says.

Frequently asked questions

What size generator do I need to run a welder?

Take the welder's rated input amps times the input volts. For example, 20 A at 120 V is about 2,400 W. Pick a generator with running watts above that, with margin.

Can I run a MIG welder on a portable generator?

Yes, if the generator's running watts exceed the welder's input load, and it is stable enough. Many welders run well on inverter generators sized with extra margin.

Is an inverter generator good for welding?

Often yes. Inverter generators give clean power, but check that the welder's maker allows generator use and that the generator can handle the load.

What is an engine-driven welder?

A welder with a gas or diesel engine and generator built in. It welds anywhere and can supply AC power for tools.

Report a mistake on this page