Top Handle Chainsaw: Uses and Safety Rules

A top handle chainsaw has its handle on top of the body, not at the rear, so it is short, light and can be held in one hand. It is made for trained arborists who work in trees, and it is not a general-purpose saw for the ground. Use two hands whenever you can, wear a harness, helmet, eye, ear and leg protection, and never use one overhead.

Top handle vs rear handle saws

FeatureTop handleRear handle
Handle positionOn top of the bodyAt the rear
Weight and sizeLighter and shorterHeavier and longer
Bar lengthUsually about 10 to 14 inAbout 12 to 24 in and up
Best forPruning and limbing in a treeFelling, bucking and general cutting
ControlLess, especially one-handedMore, with two-handed grip
Kickback riskHigher in untrained handsLower with correct handling

Arborists choose a top handle saw because it is easy to carry up a tree and use from awkward positions. The rear-handle saw is the usual choice for ground work. To size a bar for a rear-handle saw, see 16 vs 18 inch chainsaw bar length.

Who should use one

Top handle saws are tools for trained arborists with climbing gear and rescue plans. If you only prune from the ground, a pole saw keeps your feet on the ground and the blade away from your face.

Safety rules

  1. Use two hands whenever the cut allows it. One-handed cutting is for a few positions in a tree and needs training.
  2. Wear a climbing harness with a work-positioning lanyard, a helmet with face shield, ear protection, gloves and chainsaw-rated leg protection.
  3. Keep the bar below chest height when you can, and never cut above your shoulders.
  4. Watch for kickback, which is when the bar tip catches and throws the saw back. Keep the tip clear of the work.
  5. Keep the chain sharp and the chain brake working. See how to sharpen a chainsaw and chainsaw chain types.
  6. Hold training before you use one in a tree. A saw alone does not make a job safe.

Care

Keep the chain oiled with bar oil. See bar oil for what to use. Read the manual for the fuel, mix and maintenance details.

Frequently asked questions

What is a top handle chainsaw used for?

Pruning, limbing and cutting small branches while climbing in a tree. The light weight and short bar are made for that work.

Is a top handle chainsaw safe for homeowners?

It is more dangerous than a rear-handle saw for people without training. It kicks back more easily and the one-handed grip gives less control. Homeowners are usually better served by a rear-handle saw or a pole saw.

What bar length does a top handle saw take?

Short bars, usually about 10 to 14 inches. Check the maker's label for the bar and chain the saw is rated for.

Can I use a top handle saw on the ground?

It can cut small wood on the ground, but a rear-handle saw gives better control for felling and bucking. Use the saw for the job it was designed for.

Report a mistake on this page