Carbide Chainsaw Chain: Are Carbide Chains Worth It?
Carbide chainsaw chain has tungsten-carbide inserts on the cutters, so it stays sharp longer in dirty, frozen or abrasive wood, in stumps and in demolition work. It costs several times more than standard chain, cuts a little slower in clean wood, and needs a diamond wheel or diamond file to sharpen. It is worth it for rough work, but not for ordinary firewood.
Carbide vs standard chain
| Carbide chain | Standard chain | |
|---|---|---|
| Cutter | Steel with a carbide tip | Chrome-plated steel |
| Stays sharp in dirt and grit | Much longer | Dulls quickly |
| Speed in clean wood | Slightly slower | Fastest when sharp |
| Price | Several times higher | Low |
| Sharpening | Diamond wheel or diamond file | Round file |
| Best for | Stumps, frozen or dirty logs, demolition | Firewood, felling, general use |
Makers vary, so compare the claims on the packaging rather than a single number.
Where carbide chain makes sense
- Cutting stumps and roots close to the ground.
- Frozen logs and wood with embedded sand or grit.
- Demolition, where the saw may touch nails, screws or concrete dust. Metal can still chip the carbide.
- Rescue and utility work that can’t stop to sharpen.
For ordinary trees and firewood, a semi-chisel or full chisel chain is cheaper and sharpens with tools you already own.
How to sharpen carbide chain
- Remove the saw’s power, put the chain brake on and clamp the bar.
- Use a diamond grinding wheel on a chain grinder, or a diamond file of the right diameter for the chain’s pitch. A steel round file will not cut it.
- Follow the angle marked on the chain, typically 30° on many chains, and take light passes.
- Sharpen every cutter the same amount and keep the depth gauges at the maker’s setting.
The general method and file size by pitch are in how to sharpen a chainsaw. Carbide chain still needs oil and the right tension; see chainsaw bar oil.
Buying a carbide chain
- Read the pitch, gauge and drive link count off your bar; how to measure a chainsaw bar and chain shows where.
- Choose carbide only if your cutting regularly dulls standard chain.
- Buy from the saw maker or a chain maker that lists your saw and bar.
Safety
Carbide chain has the same kickback and cutting hazards as other chain. Wear chaps, a helmet, eye and ear protection, and gloves. Never cut with a dull or damaged chain.
Frequently asked questions
Is carbide chainsaw chain worth the money?
For dirty wood, stumps, frozen logs, wood with nails or grit, and demolition, usually yes, because standard chain dulls fast. For clean wood and firewood, a regular chain sharpened with a file is cheaper.
Can I sharpen carbide chain with a file?
No. Carbide is harder than a steel file. Use a diamond grinding wheel or a diamond file made for carbide chain.
Does carbide chain cut faster?
No. In clean wood it cuts a little slower than a sharp standard chain. Its advantage is that it keeps cutting after a standard chain would have dulled.
Will carbide chain fit my saw?
Only if the pitch, gauge and drive link count match your bar and sprocket. Check the numbers stamped on the bar or on the old chain.
Related guides
- Guide
Chainsaw Chain Types: Full Chisel vs Semi-Chisel
Chainsaw chain types compared: full chisel, semi-chisel, low-profile and low-kickback chains, which suits clean or dirty wood, and how they sharpen.
- Guide
How to Sharpen a Chainsaw: File vs Electric Sharpener
How to sharpen a chainsaw chain with a round file or an electric sharpener: file size by chain pitch, filing angles, depth gauges and when to sharpen.
- Guide
Can You Use Used Motor Oil for Chainsaw Bar Oil?
Why used motor oil makes poor chainsaw bar oil: it lacks tackifier, carries metal and soot, and can void the warranty. Better alternatives listed.