Pole Saws: Gas vs Battery vs Manual

A pole saw is a small saw on a long pole for cutting branches you can’t reach from the ground. Manual pole saws are cheap, quiet and fine for a few small branches a year. Battery pole saws suit most home yards: little noise, no fuel, enough power for typical pruning. Gas pole saws are the most powerful and suit large properties and regular heavy pruning. No pole saw, of any type, should be used near overhead power lines.

Pole saw types compared

TypePowerTypical bar or bladeProsCons
ManualYour armsCurved pruning saw blade, often with a lopperCheap, light, silent, no maintenanceSlow and tiring above small branches
Battery18V to 80V packsAbout 8 to 12 in chainsaw barQuiet, no fuel, starts instantlyRuntime limited by battery
Corded electricMains powerAbout 8 to 10 in barLight, no runtime limitCord limits range and is a tripping risk
GasSmall 2-stroke engineAbout 10 to 12 in barMost power, unlimited runtime with fuelHeavy, loud, needs fuel mix and maintenance

Typical reach is about 8 to 12 ft of pole, which lets you cut branches roughly 12 to 15 ft above the ground. Longer poles are heavier at the far end and harder to control.

How to choose

  • A few small branches a year: manual pole saw.
  • A typical suburban yard with fruit trees and overgrown limbs: battery pole saw, ideally on the battery platform you already own.
  • Large property, thick branches, many hours: gas pole saw.
  • Branches thicker than about 6 in, or high up in big trees: a chainsaw from a safe position, or a professional arborist.

Powered pole saws use the same bar and chain care as a chainsaw: correct chain tension, sharp teeth and bar oil in the tank. How to measure a chainsaw bar and chain helps when buying replacement chains, and can you use used motor oil for chainsaw bar oil explains which oil to use.

How to cut high branches safely

  1. Check overhead for power lines first. Keep well away; guidance commonly gives at least 10 ft from any overhead line.
  2. Wear a hard hat, eye protection, gloves and hearing protection for powered saws.
  3. Stand to the side of the branch, never directly under it, and keep a clear path to step back.
  4. Hold the pole at a comfortable angle, usually less than 60° from the ground.
  5. Cut heavy branches in steps: an undercut first, a little out from the trunk, then the top cut just beyond it, so the branch drops cleanly without tearing bark.
  6. Finish with a clean cut just outside the branch collar, the slightly swollen ring where the branch meets the trunk.

Pole saw or hand pruning saw?

For branches you can reach from the ground, a hand pruning saw is quicker and more precise. Types of hand saws with uses compares pruning saws with the other hand saws.

Frequently asked questions

How high can a pole saw reach?

Most extend to roughly 8 to 12 ft of pole, which with your own height and arm reach lets you cut branches about 12 to 15 ft up. Check the maker's reach figure for your model.

How thick a branch can a pole saw cut?

Powered pole saws commonly have 8 to 12 in bars and cut branches a few inches smaller than the bar. Manual pole saws are best on branches under about 2 to 3 in.

Can I use a pole saw near power lines?

No. Stay well clear of overhead lines; safety guidance commonly gives at least 10 ft. Call your power company or a licensed line-clearance arborist for branches near lines.

Report a mistake on this page