Strap Wrench: How to Use It vs a Chain Wrench

A strap wrench grips round objects with a flexible strap that tightens as you pull the handle, so it holds without scratching or crushing the surface. Use it on oil filters, jar lids, finished pipe and fittings. A chain wrench grips harder and suits stuck, rough parts but marks the surface.

Strap wrench vs chain wrench vs pipe wrench

ToolGripMarks the surfaceBest for
Strap wrenchGood, flexible strapNoFinished pipe, filters, lids, plastic parts
Chain wrenchStrong, chain linksYesStuck filters, large pipe, rough parts
Pipe wrenchVery strong, serrated jawsYes, deeplyThreaded steel pipe
Filter cap wrenchFits a specific sizeNoFilters with flats or cartridges

For the chain type, see chain wrench vs oil filter wrench.

How to use a strap wrench

  1. Clean and dry the part and the strap. Oil and water cause slipping.
  2. Loop the strap around the part with the free end through the slot in the handle.
  3. Pull the strap snug, so the loop is tight on the part.
  4. Pull the handle in the direction that tightens the strap. For the other direction, flip the strap around.
  5. Apply steady force. Don’t jerk, since the strap can slip.

Types

  • Rubber or nylon strap: the most common and the gentlest.
  • Metal band: grips harder, for stubborn parts.
  • Adjustable handle: takes a range of sizes from small lids to large pipe.

When to use something else

If the part won’t budge, a chain wrench or a fitted wrench holds better. For hex nuts and bolts, use a wrench or socket; see wrench sizes and adjustable wrenches.

Care

Wipe off oil and dirt, keep the strap dry and replace it if it frays or cracks.

Safety

Pull toward you, with your body clear of where the wrench would fly if it slips. Wear gloves and eye protection when you work with oil or fuel.

Frequently asked questions

What is a strap wrench used for?

Turning round parts without damaging them: oil filters, plumbing fittings with a finish, jar lids, water filter housings and chrome or plastic pipe.

Strap wrench vs chain wrench: which is better?

A strap wrench is gentler and won't mark the work. A chain wrench grips harder and handles tight, stuck parts, but it leaves marks.

Which direction does a strap wrench turn?

The strap tightens when you pull toward the closed side of the loop, so loosen with the strap pointing the correct way. Flip the strap around to reverse direction.

Why is my strap wrench slipping?

The strap or the part is wet, oily or smooth. Wipe both, rough up the strap with sandpaper, or use a chain wrench for a stuck part.

Report a mistake on this page