Adjustable Wrench: Monkey Wrench vs Crescent Wrench

In everyday use, monkey wrench, crescent wrench and adjustable wrench all mean the same tool: a wrench with one fixed jaw and one jaw that slides on a worm screw. Crescent is a brand name that became generic. The old monkey wrench was a heavier, different design. Choose the length for the nut size, and pull so the fixed jaw takes the load.

Names and what they mean

NameWhat it means
Adjustable wrenchA wrench with one fixed and one sliding jaw
Crescent wrenchA brand name used for adjustable wrenches
Monkey wrenchOften used for an adjustable wrench; the traditional type is a heavier plumbing wrench
Pipe wrenchA different tool, with serrated jaws, for round pipe

Sizes

Adjustable wrenches are sold by length, and a longer wrench opens wider and gives more leverage. Typical lengths are 6, 8, 10, 12 and 15 in. The maximum jaw opening differs by maker, so check the stamp on the wrench. For the nut and bolt sizes the jaws need to fit, see wrench sizes in metric and SAE.

How to use one

  1. Fit the jaws over the nut and turn the worm screw until they are snug on the flats.
  2. Seat the nut deep in the jaws, not at the tips.
  3. Turn the wrench so the open jaws face the direction you pull, and the fixed jaw takes the force.
  4. Pull the handle. Don’t push, and don’t add a pipe over the handle.
  5. Retighten the jaw if it loosens during the turn.

When to use another tool

A fitted wrench or socket grips the flats better and slips less, so choose one for stuck or tight fasteners. For hard-to-reach nuts, see ratcheting wrench sets. For round parts like filters, see chain wrench vs oil filter wrench.

Care

Keep the worm screw clean and lightly oiled, and wipe off grit. Replace a wrench with loose or sprung jaws.

Frequently asked questions

Is a monkey wrench the same as a crescent wrench?

In common use, yes. People say monkey wrench for an adjustable wrench. The traditional monkey wrench is a heavy wrench with a smooth jaw, usually for plumbing, but the name is used loosely.

What sizes do adjustable wrenches come in?

Common lengths are 6, 8, 10, 12 and 15 in. Longer wrenches open wider and give more leverage, though jaw capacity varies by maker.

How do I use an adjustable wrench without rounding the nut?

Close the jaw tight on the flats, with the nut fully inside the jaws. Pull so the force goes on the fixed jaw, and use a fitted wrench or socket for stubborn bolts.

Is an adjustable wrench as good as a combination wrench?

No. A fitted wrench or socket grips better and slips less. An adjustable wrench is for odd sizes and for when you have one tool to carry.

Report a mistake on this page