Considering brands and models drill bits are interchangeable. If you want to change your bits for different purposes in between two different drills, yes, that’s possible. Drills have become a very popular home tool in recent days. Everyone tries to manage a drill machine on their collection for different purposes, including home decoration, simple metalwork, or woodwork. It’s essential.
We are very determined to exhibit prior knowledge about drill bits. You get all answers to the question Are drill bits interchangeable or not. We’ll also discuss ‘Are all drill bits universal?’ or ‘Are drill bits interchangeable between brands?’ and many more.
What are Drill bits?
Drill bits are the part of a drill machine that directly involves cutting, crashing and creating holes in the surface, including metal, wood or rock. Drill machines usually use rotation power technology to create holes or remove materials on a hard surface.
You can see different kinds of bits in different drills. Hand drill, electric drill or bench drill are very common types of machines people often use at construction sites.
There are a hundred types of drills you can see which are used for different purposes. Suppose the Forstner bits are used for very sharp work. To get a clean hole in a wood Forstner is best; similarly, hole saw bits. Hole saw bits allow you to cut a bigger hole in the surface, specifically wood. Another one is tile bits; using this, you can cut a smooth hole in tiles without crashing them. These are prevalent types of bits.
- Countersink Bits
- Tile Bits
- Adjustable Wood Bit
- Bits for Metal
- Hammer Bit
- Auger Bits
- Rivet Bits
If you are interested to learn about the Best Diamond Drill Bit for Porcelain Tile then read another blog post.
Drill bits feature and size
Drill bits come in different sizes, which people use for different purposes.
Drill bit conversion Table
Center drill bit sizes-wise
|Size selection||Drill diameter (inch)|
Are drill bits interchangeable?
By considering some conditions, you can interchange drill bits for different purposes. The issues we have to consider here are shank diameter, Design, materials, and finally, jaw ability means how bigger bits can a jaw hold.
Shank Diameter is important here. There are also two different variations in the shank. One is circular and another square-shaped. You can also see some other variations in the circular shank, but that’s not our headache today.
Our concern should be materials since we are interchanging bits from different brands. Giant brands make their bits using expensive and high-quality materials like M32 or M52. So there is less chance of using different bits in an expensive machine in terms of bit quality. But in Chinese or Japanese drill machines, you can use a variety of bits, including higher and lower quality.
Why is that? Because they provide extra features along with different aspects. However, their overall quality is not the best.
The design of the drill machine is another big stuff to consider when we are talking about interchanging bits. When people ask, do all drill bits fit any drill? We can’t say yes because of the design. All drill bits can not be fit in any drill, but most of them are able to fit. Very cheap quality drills usually fail to create features like big brands.
So make sure you are buying a quality product t has a few interchangeable features. You can find this mostly on imported products, especially on Asian stuff.
The jaw is a vital part of a drill machine because it holds the bit very tightly. Good quality drill machine has a more prominent jaw that can hold bigger size bits. Jaws usually have a key and a monkey version.
Make sure your drill is an automatic non-wy version because the key version is old school. Check your jaw capability before buying a drill.
How to install drill bits?
Installing a bit in a drill is not a hard job. But you really have to know the basics of how to do this without trouble or hard work. In the first place, you have to choose your preferable jaw depending on its size with drill jaws ability. Usually, the lowest size it holds is 0.3 inches. And the highest size can not be exceeded 1 inch. Thought is dependent on different brands.
Step 1 – First of all, free your jaws means rotating the collar until it’s open. Some collars need to move left to open, some need to move on right.
Step 2 – Place the bit in the centre. Don’t leave it freely and tight the jaw. It won’t work that way. You really have to hold the bit by hand or any holder when tightening the jaw by rotating the collar.
Step 3 – Now, play a test and observe the bit. If your bit is spinning smoothly, then it is installed perfectly. But if you see that the bit is spinning unusually then, you need to change that and set another.
Some popular drill bits
Milwaukee – Milwaukee brand is a popular name for drilling, chain saw and string trimmer. But specifically, they make awesome hammer drills. However, When people asked can you use Dewalt drill bits with Milwaukee? We always say yes. Milwaukee is a brand that has many features, and its built quality is stunning. Usually, when we think to set it up, we need the adapter, but here in Milwaukee, we don’t need that. It was perfect for her.
Makita – Makita is another affordable drill maker in terms of great quality. This brand also provides a great number of features. Questions often arise: are Makita drill bits universal? Unfortunately, they are not. But most of the bits can easily fit in there. Initially, a hex shank is good to get bits when we are installing bits in a random drill. So you have to manage hex shank drill bits before installation.
Nail drill – Nail drill is a good quality drill producer, and they have a good review on amazon.
Unfortunately, nail bits are also not universal; in case you ask, are nail drill bits universal? Even only some particular types of bits are allowed to find in there. Specifically 3/32 inch or ⅛ inch.
Well, now you are all clear about your indecision, right? You can change most of the drill bits using the method we discussed. With the three spectacular jaws, it can hold anything. No matter if it’s hex bits or round-shank bits. However, there are about 30% of them you can’t change. Obviously, they are of exceptional features.